GM parts logo
ACDelco Gold Fully Coated Front Disc Brake Rotor
Gold

ACDelco Gold Fully Coated Front Disc Brake Rotor

GM Part #19391309

ACDelco Part #18A82458

MSRP$278.06*

ACDelco Gold (Professional) Fully Coated Disc Brake Rotors are the high quality alternative to Original Equipment (OE) parts.

  • COOL SHIELD coating - entire rotor surface including edges and vanes have baked-on zinc coating for durability and long lasting protection compared to uncoated
  • Coated rotors will remain cleaner longer than non-coated
  • Protective micron-thin layer helps to inhibit environmental corrosion better than non-coated roated rotors; proved in up to 200 hours of industry-standard salt-spray testing

About this product

ACDelco Gold (Professional) Fully Coated Disc Brake Rotors are the high quality alternative to Original Equipment (OE) parts. These rotors are mounted to the wheel hub where the calipers can press the brake pads against the brake surface to help slow the vehicle. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional.

Warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • COOL SHIELD coating - entire rotor surface including edges and vanes have baked-on zinc coating for durability and long lasting protection compared to uncoated
  • Coated rotors will remain cleaner longer than non-coated
  • Protective micron-thin layer helps to inhibit environmental corrosion better than non-coated roated rotors; proved in up to 200 hours of industry-standard salt-spray testing
  • Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
  • Premium aftermarket replacement part
  • Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models

Solid Or Vented Type RotorVented
ConstructionFull Cast
Nominal Thickness1.181 in / 30 mm
ABS Sensor Ring IncludedNo
MaterialCast Iron
Surface TypeSmooth
Rust Resistant CoatingYes
Mounting Bolt Hole Circle Diameter5.5 in / 139.7 mm
Outside Diameter13.504 in / 343 mm
Inside Diameter8.681 in / 220.5 mm
ClassificationGold
Discard Thickness1.102 in / 28 mm
Overall Height2.307 in / 58.6 mm
Mounting Bolt Hole Diameter0.63 in / 16 mm
Disc FinishCoated
Mounting Bolt Hole Quantity6
Hat FinishCoated
Center Hole Diameter3.096 in / 78.65 mm
Weight29.3lb

24 Months/Unlimited Miles Limited Warranty for Parts (plus Labor if installed by a GM dealer)

Please visit our warranty page on Gmparts.com for full warranty details.

The following should be conducted by a qualified technician:

  • Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
  • Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
  • Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
  • Check the thickness of your brake pads.
  • Inspection of the brake hoses for brittleness or cracking.
  • Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
  • Inspection of wheel bearings and grease seals.
  • Parking brake adjustments (as needed).

Troubleshooting Tips:

  • Vehicle pulls to the left or right when brakes are applied.
  • Visible ridges or deep grooves on the rotor surface.

ModelBody StyleTrimYear(s)
Escalade2021, 2022, 2023, 2024
Escalade ESV2021, 2022, 2023, 2024

Frequently Asked Questions

Yes, ACDelco also offers GM OE brake rotor and Advantage brake rotors.