GM parts logo
ACDelco Gold Front Driver Side Disc Brake Caliper Assembly (Friction Ready Non-Coated), Remanufactured
Gold

ACDelco Gold Front Driver Side Disc Brake Caliper Assembly (Friction Ready Non-Coated), Remanufactured

GM Part #19176794

ACDelco Part #18FR2247

MSRP$169.39*

ACDelco Gold (Professional) Remanufactured Friction Ready Disc Brake Calipers are the high quality alternative to Original Equipment (OE) parts.

  • Pressure tested to ensure safe and confident braking
  • Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
  • Developed without attached brake pads for customization

About this product

ACDelco Gold (Professional) Remanufactured Friction Ready Disc Brake Calipers are the high quality alternative to Original Equipment (OE) parts. They use both aluminum and iron castings. These loaded calipers contain Ethylene Propylene (EPDM) rubber components to provide superior resistance to heat, corrosion, and leakage. ACDelco Professional Remanufactured Friction Ready Disc Brake Calipers are developed without attached brake pads, allowing customization for the application at hand. Bleeder screws, copper sealing washers, hardware, and mounting brackets are all included for easy installation. Remanufacturing disc brake calipers is an automotive industry practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them.

Warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • Pressure tested to ensure safe and confident braking
  • Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
  • Developed without attached brake pads for customization

Mounting Hardware IncludedYes
Grade TypePerformance
Pad Wear Sensor IncludedNo
Caliper Slides IncludedYes
Caliper TypeFloating
Pads IncludedNo
Inlet Fitting TypeFemale
Core Charge45.00
ClassificationGold
Mounting Hole Diameter14in
Mounting Bracket IncludedYes
Caliper Casting MaterialCast Iron
Caliper ColorNatural
Anti-Rattle Spring IncludedNo
Piston Quantity2
Weight17.39lb

24 Months/Unlimited Miles Limited Warranty for Parts (plus Labor if installed by a GM dealer)

Please visit our warranty page on Gmparts.com for full warranty details.

The following should be conducted by a qualified technician:

  • Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
  • Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
  • Inspect the brake lines for rust, punctures, or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
  • Check the thickness of your brake pads.
  • Inspection of the brake hoses for brittleness or cracking.
  • Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
  • Inspection of wheel bearings and grease seals.
  • Parking brake adjustments (as needed).

Troubleshooting Tips:

  • Vehicle pulls to the left or right when brakes are applied.
  • Brake pedal pulsation (not to be confused with normal ABS operation).

Certain automotive parts can be recycled and remanufactured for future use. These parts have a "core charge" that is used as a deposit on the portion of the part that can be reused. The reason for this charge is to encourage the return of your old part. When the recyclable component from your old part is returned to us, the charge is refunded to you.

ModelBody StyleTrimYear(s)
Escalade2007, 2008
Escalade ESV2007, 2008
Escalade EXT2007, 2008

Frequently Asked Questions

No, but it is a good idea to inspect them for wear-out, cracking, leaking etc.

Yes, ACDelco also offers GM OE disc brake calipers.

No, but it is a good idea to inspect them at every tire rotation.