GM parts logo
ACDelco GM Original Equipment Oil Filter
OE

ACDelco GM Original Equipment Oil Filter

GM Part #12742682

ACDelco Part #UPF63R

MSRP$21.14*

InstallationACDelco Gold Enhanced Performance Ultraguard Oil Filters are designed using filtering technology that helps provide tight seals and reduced engine wear.

  • Heavy duty shell material is tested to four (4) times normal engine oil pressure and helps protect filter from rock impingement.
  • Heavy threaded plate helps protect against pressure spikes eight (8) times above normal operating pressure
  • Ethylene Acrylate Rubber (AEM) premium anti-drainback valve tested to 175C (347F)

About this product

InstallationACDelco Gold Enhanced Performance Ultraguard Oil Filters are designed using filtering technology that helps provide tight seals and reduced engine wear. These premium oil filters provide outstanding protection for demanding uses. With 98% multi-pass efficiency at 25-30 microns combined with increased burst-strength and durability, the ACDelco Ultraguard Oil Filter is the clear choice when performance matters.Installation

Warning WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • Heavy duty shell material is tested to four (4) times normal engine oil pressure and helps protect filter from rock impingement.
  • Heavy threaded plate helps protect against pressure spikes eight (8) times above normal operating pressure
  • Ethylene Acrylate Rubber (AEM) premium anti-drainback valve tested to 175C (347F)
  • Heavy duty steel cover supports a high temperature gasket tested to 175C (347F)
  • Spiral wound steel core tested to twice the OEM collapse requirement. 30% stronger than 'straight locked' core designs
  • Poppet style bypass valve (if required) with heat treated spring matching OEM pressure specifications
  • Blended media are tested beyond normal change intervals
  • Heavy duty shell is tested to four times normal engine oil pressure
  • Heavy threaded plate helps protect against pressure spikes
  • Ethylene Acrylate Rubber (AEM) premium anti-drainback valve tested to 175C/347F
  • Heavy duty steel cover supports a high temperature gasket tested to 175C/347F
  • Spiral wound steel core tested to twice the OEM collapse requirement
  • Poppet style bypass valve (if required) with heat treated spring matching OREM pressure specifications
  • Blended media are tested beyond normal change intervals

Housing ColorBlack
Gasket Thickness0.27 in / 6.98 mm
Outer Diameter Bottom2.93 in / 74.63 mm
ClassificationOE
Height6.22 in / 158.02 mm
Gasket Outside Diameter2.76 in / 70.31 mm
Gasket Inside Diameter2.39 in / 60.71 mm
Marine ApprovedYes
Torque NutNo
Non Slip GripYes
Gasket MaterialRubber
Gasket TypeGasket O-Ring
Bypass Relief ValveYes
Anti-Drain Back ValveYes
Universal Or Specific FitSpecific
Gasket Or Seal IncludedYes
Outside Diameter Top2.95 in / 75.11 mm
Grade TypeStandard Replacement
Bottom Inside Diameter1.35 in / 34.43 mm
Inside Diameter Top2.08 in / 53.05 mm

24 Months/Unlimited Miles Limited Warranty for Parts (plus Labor if installed by a GM dealer)

Please visit our warranty page on Gmparts.com for full warranty details.

ModelBody StyleTrimYear(s)
LaCrosseAvenir, Essence, Preferred, Premium, Sport Touring2017, 2018, 2019
Regal SportbackGS2018, 2019, 2020